Yale SmartHome Alarm series Spezifikationen PDF herunterladen (Seite 10)

10

About your alarm system (default settings)

Eachsystemhas20freeSMScredits,after

which Yale reserves the right to charge for any

additionalSMSsent.

i

To change the exit and entry timer, please see

“Controller” -> “Panel Setting”

Home arming is disabled by default. If you need

Home arming function, see page 11.

To change the attributes of individual sensors

(i.e. Burglar attribute where the individual

sensor will instantly alarm when triggered),

please go to “Devices”, then click on sensor’s

arrow (on the right).

i

All accessories are pre-set to

“entry” attributes.

When the system is ﬁrst armed, users will have 30

seconds to exit the building. The System will ignore

any sensors triggering in this duration.

If the system is already armed, triggering any

sensors will cause an entry countdown to begin.

When the alarm is triggered, the

system will send an email, push

notiﬁcation (iOS only) and SMS to

alert the owner.

The network trafﬁc condition will determine how

quickly user is alerted. There maybe noticeable delay

shouldthethirdpartyemail/SMSgatewaybecomes

congested.

You will be prompted on the app when trying to

arm with your door/window open.

i

It is possible to arm the system

with “open” door contact (i.e.

windows open).

Jamming and interference

detection disabled as default.

If Jamming and interference is of concern,

please enable via “Controller” -> “Panel

Setting”

i

Supervision is disabled as default

(recommended).

Enable or disable supervision detection on

the control box. PIR, Door Contact, Smoke

Detector and Siren can be monitored for

outage using this feature. Except for Smoke

Detector (which is always on), the other three

accessories need to have supervision enabled

on board to facilitate this feature.

Supervision can be enabled via “Controller” ->

“Panel Setting”.

i

Comfort LED is disabled as

default (recommended).

Please enable Comfort LED via “Devices” ->

Siren properties (arrow on the right).

NOTE: This function will signiﬁcantly reduce

your Siren’s battery life.

i

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare