Yale SmartHome Alarm series Spezifikationen PDF herunterladen (Seite 13)

•A24Hourdoorcontactisactiveallofthetime

and does not have to be armed or disarmed,

if triggered a burglar alarm will be activated

immediately.

Emergency

•Anemergencydeviceisactiveallofthetimedoes

not have to be armed or disarmed, if triggered an

emergency alarm will be activated immediately.

Edit Devices

To edit all of the devices that has already been

installed, choose ‘edit devices’ in the device +/-

menu. All of the devices included in the system will

be displayed.

1 Use st keys to scroll the display and choose the

device for editing. Press 3 to select. Depending

on the device a list of zone types will be given,

otherwise you will be asked to enter a name.

2 If available select a zone type and press 3 to

conﬁrm.

3 After conﬁrming the zone type (if available), you are

now asked to enter a name. Press 3 to conﬁrm or

P to cancel without naming.

Device Naming

•Eachdevicecanbegivena12charactername.

Names can be given either when ﬁrst adding a

device or by editing them later.

•Whenthe“Enter New Name” screen is displayed

the numeric keyboard can be used to enter text.

Simply ﬁnd the corresponding numeric key with

the required character and press repeatedly until

the wanted character appears. Release the key

and the ﬂashing cursor automatically jumps to

the next position for you to continue with the next

character by the same method.

•Thekeyshavethefollowingfunctions:

1 1

2 2ABCabc

3 3DEFdef

4 4GHIghi

5 5JKLjkl

66MNOmno

7 7PQRSpqrs

8 8TUVtuv

9 9WXYZwxyz

0 0 <space>/&’.”+

P Backspace and delete

•Thenamecanbeerasedbyclearingthedisplayby

pressing P repeatedly, followed by 3.

4 Press 3 when completed to conﬁrm the name and

return to the device list.

Remove Device

To delete a device choose ‘remove device’ in the

“Edit device” menu. A list of all programmed devices

will be shown.

1 Use st keys to select the device you wish to

delete and press 3.

2 The selected device will be displayed again, press

3 to conﬁrm deletion or P to return to the device

list without deleting.

•Ifadevicenamehasnotbeenprogrammedthe

screen will show the preset zone number instead.

Program Siren

To program the siren, select ‘program siren’ in

the “Edit device” menu. The following items are

available in this menu:

• Siren Tamp. On

• Siren Tamp. Off

• Conrm On

• Conrm Off

• Entry Snd On

• Entry Snd Off

• Comfort LED

Siren Tamp. On, Siren Tamp. Off

The siren tamper switch can be enabled and

disabled remotely.

•Thesirentamperprotectionautomaticallyswitches

back on after one hour.

Conﬁrm On, Conﬁrm Off

The siren can be enabled for arming and disarming

conﬁrmation where one pip and ﬂash is given for

arming, with two pips and ﬂashes from side to side

for disarming.

Entry Snd On, Entry Snd Off

The entry and exit warning beeps can be echoed on

the siren.

Comfort LED

If enabled, the siren LED will ﬂash periodically

according to the set interval. This will reduce the

battery life accordingly. Select disable to disable this

function (Default Off).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Yale SmartHome Alarm series Spezifikationen Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Yale SmartHome Alarm series