Yale SmartHome Alarm series Spezifikationen PDF herunterladen (Seite 12)

If you press any test/learn button on any learnt-in

sensor (conﬁrm by pressing 3), these sensors will be

ignored during the Home Arm mode.

Repeat this step to ignore additional sensors.

Devices

Select ‘Devices’ in the main programming menu to

add or remove a device. From here you will be able

to view a list of all the devices being installed and

you can add or delete devices. The following items

can be selected.

· Add Device

· Edit Devices

· Remove Device

· Program Siren

Add Devices

1 To learn-in a new device select ‘Add Device’

then press 3, a “push Button on Device to Add”

message will be shown.

2 Press the learn button on the device within 30

seconds (see Chapter 2 for location).

3 If a signal is detected, the screen will show the

type of device found.The upper right corner will

show the radio signal strength ranging from 1 to 9

(strongest). Relocate the sensor if this is below 5

(unstable).

•Devicesarelabeledbythefollowingcodeswithin

the control unit:

· Door Contact DC

· PIR Sensor IR

· Smoke Sensor SD

· Remote Keyfob RC

· External Siren BX

· Remote Keypad KP

· Help Button FP (Fix-Panic)

•Whenasensorisaddedtothesystemfor

a second time, an error “Already in System”

message will be brieﬂy displayed and the control

unit will wait for another learn-in signal.

4 Press 3 to conﬁrm the device type.

5 The following zone types will need setting for door

contacts and PIRs:

· Burglar

· Home Omit

· Entry

· Away Entry

· 24 Hour (DC only)

The following devices have a ﬁxed emergency

zone type:

· Smoke Detector

· Remote Controller emergency Button

· Help Button

· Remote Keypad dual emergency buttons

· Control Unit dual key emergency (1 and 3) keys

Zone Type List

Burglar

•Whenthesystemisinhomeorawayarmedmode

and a burglar device is triggered, a burglar alarm

will be activated immediately.

•Adevicesettoburglarwillnottriggeranalarm

during entry or exit delay periods.

Home Omit

•Ahomeomitdevicewillbeignoredwhenthe

system is home armed.

•Ahomeomitdevicewillgiveaburglaralarmwhen

the system is away armed.

Entry

•Ifanentrydeviceistriggeredwhenthesystemis

either away or home armed, it will start an entry

delay period to give enough time to disarm the

system.

•Ifthedelayperiodexpireswithoutbeingdisarmed,

the control panel will respond with a burglar alarm.

•Ifthedevicehasbeensettoentryandtriggered

when the system is in disarmed mode, the control

unit will make a ‘ding-dong’ door chime sound if

the door chime feature is enabled.

Away Entry

•Ifanawayentrydeviceistriggeredwhenthe

system is in armed mode, the control unit will

start an entry delay period to give enough time to

disarm the system.

•Ifthedelayperiodexpireswithoutbeingdisarmed,

the control panel will respond with a burglar alarm.

•Anawayentrydeviceisignoredwhenhome

armed.

•Thedevicewillnotgivea“dingdong”chimesound

when door chime is selected.

24 Hour

•Thedoorcontactistheonlydevicethathasthis

zone type, the PIR does not.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Yale SmartHome Alarm series Spezifikationen Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Yale SmartHome Alarm series