Yale HSA3000 Spezifikationen PDF herunterladen (Seite 4)

4

Smoke detector accessory

1 Remove the cover and insert three AA batteries.

2 The Smoke detector will now enter into self-

calibration mode for 15-20 minutes (Do not

touch during this time). It will resume normal

operation after this period.

Help button accessory

Remove the cover by loosening the ﬁxing screw

and insert the CR2032 battery (supplied) as

shown (1). Please observe battery polarity.

Door/window contacts

1 Remove the cover of each door/window contact

by loosening the fixing screw.

2 Insert two AAA batteries into each detector as

shown. The indicator LED will flash briefly.

7

Keypad remote control

Remove the cover and insert the 3 AAA alkaline

batteries as shown. The ‘Tx’ LED will flash briefly

while components initialise.

Please note, the Home button on the operating

panel and the jumper switch inside (do not move)

have no function on this model.

Smoke detector accessory

Remove the cover and insert the four AAA

batteries as shown.

Keyfob remote control accessory

Slide off the battery cover, insert the

23A/MN21 battery as shown, and replace

battery cover. Switch to ‘on’.

Help button accessory

Remove the cover by loosening the fixing

screw and insert the 12V battery (supplied) as

shown. Please ensure you observe battery

polarity.

Tamper

switch

Jumper

switch

Tamper

switch

Jumper

switch

Magnet

Extension terminals

Learn/Test button

Learn/Test

button

On/Off switch

Keyfob remote control accessory

1 Open the battery compartment using a coin

by turning the cover in the direction of the big

arrow so the cover small arrow is next to round

dot.

2 Insert CR2032 battery and replace cover.

/

Learn/Test

Button

LED

ale

Y

1

Panic/Learn

button

1 2 3 4 5 6 7 8 9 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare